Whether you’re new to learning how to crochet a hat or just looking for a super fast project, this free crochet hat pattern for beginners is astonishingly easy.
If you can crochet a rectangle, you can make this simple unisex beanie pattern!
Get the full free pattern and step-by-step video tutorial below or purchase the ad-free, printable PDF here.
This easy crochet hat pattern + tutorial contains affiliate links.
Jump to:
- A True Beginner Crochet Hat Pattern
- How to Crochet a Hat in 1.5 Hours
- Save This Beanie Pattern
- A Winter Crochet Beanie That Looks Knit
- How to Modify this Simple Hat Pattern
- Size Chart for Crocheting Beanies
- Best Yarn for Chunky Beanies
- Step-By-Step Video Tutorial
- Easy Crochet Hat Pattern
- A Tapered Beginner Crochet Hat Option
- FAQs About Crocheting Hats
- More Free Crochet Hat Patterns
- Invitation to our Facebook group
- That was so fun! Now what?
- How to Crochet a Chunky Ribbed Beanie – A Summary
A True Beginner Crochet Hat Pattern
Need a last minute gift? Just learned how to crochet? Snowstorm blowing in? Whatever your situation, this extremely easy crochet beanie pattern has you covered.
Crocheting a hat usually requires working in the round, plus a decent amount of counting and increasing or decreasing. But not this time!
With our beginner-friendly approach, you’ll lean on the most basic crochet stitches to create a simple hat from a rectangle. This makes this pattern easy enough to attempt as your first crochet project ever.
Why you’ll love this ribbed beanie pattern!
How to Crochet a Hat in 1.5 Hours
Here’s a quick overview of how to crochet a basic beanie:
Step 1: Measure your head circumference.
Step 2: Crochet a rectangle based on your head measurements. (Details below.)
Step 3: Join the rectangle into a “tube.”
Step 4: Cinch one end of the tube closed.
Step 5: Add an optional pom pom.
This method of hat making allows you to finish the entire beanie in about an hour and a half. (And when I say an hour and a half, I mean start to finish. Including the time it takes to find the remote and cue up a movie.)
Save This Beanie Pattern
Not ready to start? Save this free crochet hat pattern for adults and come back to it later.
A Winter Crochet Beanie That Looks Knit
I’ve been really into crochet stitches that look knit lately. (If you are too, you’ll love this collection of 15 free crochet patterns that knit and this how to crochet the “knit stitch” video tutorial.)
So when I set out to design this super easy beanie crochet pattern, I decided to give it a ribbed look that resembles the vibe of a classic knit cap.
This is the crochet cap I’d want if I were going ice fishing in Minnesota followed by dinner at my favorite ironic hipster hot dog stand. Ha.
Related: 27+ Best Crochet Hat Patterns for Winter
Creating the Crochet Ribbing Stitch
How do we make crochet look like knitting? In the case of this chunky beanie, it’s quite easy.
In this pattern, we’re using typical double crochet stitches. Instead of inserting the hook under both loops of each stitch though, we’re just working under the “back” loop only (abbreviated “blo”). This creates the nice ribbed look that mimics knitting.
How to Modify this Simple Hat Pattern
When you understand the basic concepts of how to crochet a hat from a rectangle, you can easily modify the style of your beanie.
Here are a few pattern variations to try:
Pro Tip: Once you learn how to crochet a hat, you can begin to substitute different weights of yarn. Simply crochet a rectangle that meets the dimensions listed in the pattern and you’ll be good to go!
Pin it! click to pin this pattern for later ⇨
Size Chart for Crocheting Beanies
The classic style of this beginner crochet hat pattern is perfect for men, women and kids. Choosing the correct size is quite simple. Measure your actual head circumference right above your ears to know which hat size is right for you.
TIP: If you don’t have a flexible measuring tape available, wrap a piece of yarn around your head without stretching it and measure the length of the string.
Hat Size | Head Circumference | Rectangle Measurement |
---|---|---|
Preschool | 18-20″ | 16.75” x 9.75″ |
Older Child | 19-21″ | 18” x 11.25″ |
Adult Small | 20-22″ | 18” x 14.5″ |
Adult Medium | 22-23″ | 20” x 14.5″ |
Adult Large | 24-25″ | 22” x 14.5″ |
Adult Sizes
This bean crochet pattern is designed to fit with 2-3 inches of negative ease. This means that the finished hat will be a few inches smaller than your actual head circumference. This allows the hat to feel comfortable without sliding off your head.
Adult Small: Young teen (hat has approx. 18” circumference, unstretched)
Adult Medium: Most women and men (hat has approx. 20” circumference unstretched)
Adult Large: Larger heads (hat has approx. 22” circumference unstretched)
Kid Sizes
Want to make this crochet beanie pint-sized for your favorite kiddo? You can find this same style of free hat pattern for kids here. This smaller version of the pattern includes preschool and child sizes.
Best Yarn for Chunky Beanies
This easy hat pattern uses a category 5 weight yarn (sometimes also called “bulky weight”). Using a chunky yarn makes this hat quick to whip up and creates the classic winter beanie look.
These are a few of my favorite chunky yarns for fast crochet patterns:
Lion Brand Hue + Me – A gorgeous color palette and low maintenance care instructions make this my go-to chunky yarn.
Lion Brand Wool-Ease Tonal – This painterly yarn has been discontinued, but works great for this pattern if you get your hands on some.
Lion Brand Scarfie – A lofty wool-blend yarn that creates a soft ombre look as you crochet.
Related: 35+ Easy Chunky Beanies to Crochet
How to Substitute Yarn
Would you like to swap out the category 5 yarn to use a different weight yarn? No problem! Simply follow the gauge swatch instructions to determine how many stitches you will need to crochet a rectangle with the same dimensions as the pattern below.
Pro Tip: Want to use up your stash? Holding two strands of worsted weight yarn yarn together is a great substitution for the chunkier category 5 yarns used for the beanies pictured.
Step-By-Step Video Tutorial
If you want to step-by-step guidance as you learn how to crochet a hat for beginners, I’ve got you covered!
Watch a full step-by-step video tutorial of this beginner crochet hat pattern below. Then scroll down a bit more to find the written instructions and photo tutorial.
(Note: If you’re running an ad-blocker, you’ll need to disable it to view the video player below.)
Easy Crochet Hat Pattern
Alright, let’s explain this concept in written pattern form. Here is exactly how to crochet a chunky ribbed beanie for beginners.
Design + Construction Notes
• This basic beanie pattern is worked back and forth in rows. The rectangle will be rotated for seaming which means these rows will become the vertical ribs on the hat.
• To adjust this crochet hat pattern to fit a child, chain fewer stitches at the beginning and work fewer total rows. Get the detailed kids free crochet hat instructions here.
• After Row 1, the double crochet stitches are worked only under the back loop (blo) of the stitch from the previous row. This is always the loop farthest away from you, regardless of which side of the crocheting is facing you.
Yarn Pictured In Tutorial
See notes above for substituting yarns.
• Lion Brand Wool-Ease Tonal (Weight: 5/ bulky – 124 yds, 4 oz) – 2 skeins
– Colors pictured: Smoke (635-149) and Slate Blue (635-107)
Additional Materials
Here’s what else you’ll need to make your hat.
- Tapestry (yarn) needle
- Size L (8 mm) crochet hook – or whatever size hook helps you meet the gauge below
- Stitch markers or safety pins
- Scissors – the sharper the better if you’re making a DIY pom pom
- Fur pom pom or pom pom maker (alternative: a small piece of cardboard)
Gauge
10 stitches = 4”
just over 4 rows = 4”
Checking your gauge is important because it will influence how your hat fits. That said, if your gauge is slightly off but you’re happy with your hat height, just adjust the number of rows to achieve your ideal hat “tightness” fit.
Remember: It’s always okay to change your hook size to help you achieve the pattern gauge!
Abbreviations and Glossary (US Terms)
These are the crochet terms you’ll find in the beginner crochet hat pattern below. If you don’t yet know how to read a crochet pattern, just follow along with the video tutorial above. It’ll also walk you through how to crochet a hat step-by-step.
ch – chain
dcblo – double crochet through the back loop only (see photo below)
tch – turning chain
st – stitch
sk – skip
RS – right side
WS – wrong side
rep – repeat
Pattern Notes
- This pattern is written in size small with medium and large instructions written in parenthesis. S (M/L)
- The chain 3 at the beginning of each row doesn’t count as a stitch.
- When only one number is given, it applies to all the pattern sizes.
- To make more of a slouch hat than a beanie, add 7-12 chains to your foundation row.
- To create a color-block beanie with a different colored brim: Work approximately 11 sts in one color, then switch colors mid row and complete the row in the second color. Work back and forth switching colors in the middle of each row. Both colors should stay attached to your project throughout.
Begin by checking your head measurement. This will determine how many rows are included in your rectangle. (Reference the size chart above for more details.)
Foundation Row: Chain 37.
(For a two color hat, switch colors after 11 chains and work the remaining 26 chains in your second color.)
Row 1: Skip the first 3 chains, dc in the fourth ch from the hook and each ch to end of row; turn. (34)
Row 2: Ch 3, dcblo in each dc to end of row; turn. (34)
Rep Row 2 16 (18, 20) more times to create a total of 18 (20,22) rows. If you’re not happy with the way the rectangle is fitting around your head at this point, adjust the number of total rows. Be sure to finish with an even number of rows.
Fasten off, leaving a 24” yarn tail.
Dimensions of Finished Rectangle
Rectangle dimensions should now be approximately:
Adult Small: 18” x 14.5″
Adult Medium: 20” x 14.5″
Adult Large: 22” x 14.5″
Determining “Wrong” Side of fabric
If you’re right handed: The tail of your final row should be on the bottom left when the WS is facing.
If you’re left handed, the tail of your final row should be on the top left when the WS is facing. (See photo above for reference.)
Seaming Rectangle Into a Tube
To best disguise the join, seam is worked only through the chain stitches and the loop of each double crochet stitch that is closest to the seam.
Lay rectangle horizontally with WS facing up. Use stitch markers or safety pins to pin long sides of rectangle together, if desired. Thread tapestry needle with tail from fastening off.
Step 1: Work from the top of double crochet stitch into top of corresponding chain.
Step 2: Then work from bottom of next chain into the bottom of the next corresponding double crochet.
Continue like this through the top of one double crochet to the top of one chain and then through the bottom of one chain and the bottom of one double crochet. Repeat until end of seam.
Tie a simple sewing knot by inserting needle in crochet fabric to create a loop of yarn, then inserting needle through loop of yarn and pulling tight. This will prevent seam from puckering in next step.
Do not cut yarn tail yet.
Closing Crochet Beanie Top
Using tapestry needle and strand of yarn leftover from previous seam, whip stitch around the top of the hat. Work one whip stitch into each row end.
Pull yarn tail to tighten circle as much as possible. Then use the attached tapestry needle to sew up remaining small opening in top of hat if necessary. If you plan to attach a pom pom, do not trim this tail or remove your tapestry needle quite yet.
How to Attach a Pom Pom to a Crochet Hat
At this point, you have two finishing options:
Option 1: Create a yarn pom pom with a large pom pom maker or a 2.5” piece of cardboard. Learn how to make a yarn pom pom here.
Option 2: Use a faux fur pom pom that compliments your chosen yarn. Learn how to create your own DIY faux fur pom poms.
In either case, use remaining tail and attached yarn needle to join pop pom to hat top. If using a yarn pom pom, it can be helpful to whip stitch into the center of the pom pom a few times to help secure all the small pieces of pom pom yarn.
Fasten off and weave in any remaining ends. (There shouldn’t be many!)
Pop your new crochet hat on your head and get to work on making one for everyone you know!
A Tapered Beginner Crochet Hat Option
Once you’ve completed this beginner crochet hat, you’ll definitely want to check out our easy crochet hat pattern for babies (and kids and adults) and corresponding easy crochet hat video tutorial.
This pattern uses chunky yarn and equally simple techniques to create a classically tapered hat. And it’s written in seven sizes! (preemie, baby, toddler, child, tween, women and men)
FAQs About Crocheting Hats
Absolutely! The 1.5 Hour Beanie pattern is ideal for crochet beginners because it’s nothing more than making a large practice swatch. It will take you longer than an hour and a half to complete, but it is a very approachable first crochet project.
Hats can be crocheted from the top to bottom or bottom to top. In the case of this beginner crochet hat pattern, we avoid all this entirely by crocheting one simple rectangle.
This easy hat pattern begins with a typical chain of 37 stitches. The first row is worked in double crochet. The rest of the hat is working in double crochet, but only through the back loop of each stitch.
A crochet hat should generally be 2-3 inches smaller than the circumference of your head (measured right above your ears.) This “negative ease” allows the hat to feel comfortable without falling down your forehead.
More Free Crochet Hat Patterns
From messy bun beanies to easy crochet bucket hat patterns, we’ve got lots more ways to keep your head covered. If you loved this pattern, here are some more modern crochet beanie patterns to try out!
See more hat crochet patterns →
Invitation to our Facebook group
Come discuss easy hat patterns and lots of other crochet projects and techniques in our Make & Do Crew Facebook group. Here thousands of helpful crocheters answer each other’s questions and share their stitches. Come join us here.
That was so fun! Now what?
More Fast Crochet Patterns
Maybe your countdown to Christmas is on or you just love a quick satisfying crochet project. Here are our most popular free patterns crocheters turn to when they want super fast crochet projects.
• 3 Hour Chunky Crochet Mittens
• Done in a Day Crochet Blanket Pattern
• 2 Hour Fast Beginner Crochet Slippers
• Presto 4.5 Hour Fast Crochet Afghan
How to Crochet a Chunky Ribbed Beanie – A Summary
Materials
Yarn
- Lion Brand Wool-Ease Tonal Weight: 5/ bulky – 124 yds, 4 oz – 2 skeins
- COLOR: Smoke 635-149
- COLOR: Slate Blue 635-107
- Tapestry needle
Additional Supplies
- Size L (8 mm) crochet hook
- Stitch markers or safety pins
- Fur pom pom or pom pom maker/small piece of cardboard
Abbreviations + Glossary (US Terms)
- ch – chain
- dcblo – double crochet through the back loop only
- tch – turning chain
- st – stitch
- sk – skip
- RS – right side
- WS – wrong side
- rep – repeat
Abbreviations and Glossary (US Terms):
Want some company while you crochet?
Get support (and camaraderie!) in the Make & Do Crochet Crew Facebook Group. Search “Make and Do Crochet Crew” on Facebook.com.
Permissions + Copyright
Please do not publish or share this pattern as your own. You may make items to sell with this pattern. In exchange, please link back to this page. Do NOT use my photos as your own sales photos.
Overall Pattern Notes
Instructions
Basic crochet hat making process
- Step 1: Measure your head circumference.
- Step 2: Chain 37 stitches.
- Step 3: Skip first 3 ch, double crochet in each remaining ch; turn.
- Step 4: Crochet a rectangle based on your head measurements, working through the back loop of each double crochet stitch only.
- Step 5: Join the finished rectangle into a "tube."
- Step 6: Cinch one end of the tube closed.
- Step 7: Add an optional pom pom to the closed end of your beanie.
rivenwood says
Hi there, how many skein do I need to use for a M size beanie?
Herbella says
Could I use a k crochet hook? I’m a beginner and It’s the one I have and dont really want to go out and buy one.
PATRICIA KELLMANN says
love this hat have ya ever did one for a guy wanted to ask you if you have a video on how to put it together nice directions and work could ya email me if possible
rashida says
It was quick thick and warm, fits just right! I’ll be making more..Awesome! Thank You for sharing!
Jess @ Make and Do Crew says
Yay! I love hearing that!
Brittany Roberts says
How can I make this in. Child size? What are the reduction ratios?
Jennifer says
Hi Jess,
Thanks for posting this. I’d love to purchase the PDF file, but the link doesn’t seem to work. I click on it and nothing happens. The hat looks adorable and I’d love to make it! Thanks
Christine Drechsler says
Hi Thank you for this awesome pattern for the 1 hour beanie – it has taken me much longer, as this is my first time making anything like this, but I am persisting !! I have a question on the yarn – I am using a 5 – bulky yarn, but it is 3.5 oz on the label. I noticed your pattern says 4.0oz . I am using 8.0mm hook per the pattern. I have done all 18 rows and the dimensions of the rectangle are : 11 x 12″. My foundation row of 37 chains comes out to only 12″ vs. 14.5″ long. The 18 rows are only 11 ” wide. vs. 18: Do you think mine is coming out smaller because the yarn is 3.5 oz vs. 4 oz? I chose “5” bulky so I thought that would be the same?? I plan to just add more rows so it will fit around my daughter’s head, but I’m curious if you have any idea what I did wrong…….. and why my width/ length are so much smaller in dimensions that the pattern says?
Jess @ Make and Do Crew says
Hey Christine,
These are great questions! The amount of yarn in the ball (3.5 oz vs 4 oz) should have no impact on how your hat turns out. Instead, it just impacts how much yarn is in the ball. You have the right idea by choosing a category 5 yarn to make sure it’s the same weight as what’s in the pattern.
I suspect that your stitches a just a bit tighter than the pattern gauge. You could verify this by measuring a 4″ square of your hat and compare it against the gauge listed in the pattern.
You’re right that just adding extra rows will work just fine though and your daughter will have a pretty hat to wear! Just be sure to work an even number of rows total as that is what will make the ribbing look the most seamless. 🙂
Jess
Christine Drechsler says
Jess – a correction to a typo on my prior comment – the dimensions of my rectangle are 12″ (the length of my foundation row of 37 ch) and the width is only 11 ” after doing 18 rows of dcblo…….. when it should be 18″ x 14.5″ I said 14 instead of 18″ in the above comment. So, I’m curious why you think my rectangle is so much smaller?
Christine Drechsler says
Hi Thank you for this awesome pattern for the 1 hour beanie – it has taken me much longer, as this is my first time making anything like this, but I am persisting !! I have a question on the yarn – I am using a 5 – bulky yarn, but it is 3.5 oz on the label. I noticed your pattern says 4.0oz . I am using 8.0mm hook per the pattern. I have done all 18 rows and the dimensions of the rectangle are : 11 x 12″. My foundation row of 37 chains comes out to only 12″ long. The 18 rows are only 11 ” wide. vs. 14: Do you think mine is coming out smaller because the yarn is 3.5 oz vs. 4 oz? I chose “5” bulky so I thought that would be the same?? I will just add more rows so it will fit around my daughter’s head, but I’m curious if you can figure out what I did wrong…….. and why my width/ length are so much smaller in dimensions that the pattern says?
Jess @ Make and Do Crew says
Hey Christine,
Yes, I imagine there’s a bit of a difference in the thickness of the yarn or the way we crochet. A good rule of thumb is to make a small gauge swatch (like 5″ x 5″) before you start a project to see if you need to change your hook size to meet the designer’s gauge that’s listed in the pattern. Sometimes we crochet differently or use different yarn the that affects the sizing. In any case, your solution is a great one and if you’d like to make more hats, you can always just chain a few extra stitches at the beginning to make it a bit taller. 🙂
Jess
Michele Jones says
Hi! Thank you for the beautiful pattern – I can’t wait to try it! I’m working on some baby beanies, and wondered how big the rectangle should be for a tiny one? The American Heart Association is collecting red knitted and crocheted hats to give to new babies in local hospitals to raise awareness for heart defects. They said they will take any baby size – babies come in all shapes and sizes! – but I thought I’d ask for advice before I jump right in. Thanks so much!
Jess @ Make and Do Crew says
Hey Michele,
What a generous project you’re taking on! I’d google something like “average newborn baby head circumference” or something like that. Then you can just make a rectangle width slightly less than the total circumference of a baby head to allow some room for stretching. I’m not exactly sure about the height of the initial chain though. Perhaps with some googling you could find an average baby “head height” too? Lol, is that even a thing?
Jess
Michele Jones says
🙂 I’m not sure! But I can find out! I just realized I can also take a tape measure next time I go to Target and see if they have any baby beanies or hats I can measure. Thanks for the input!
Karin says
I’m honing my skill on these easy crochet patterns. Thank you for sharing! My seam didn’t turn out as nice as yours but I’ll figure out the technique on the next one. Loved your video. My hats a little taller than yours but all in all I’m pretty proud how it turned out. Thank you again!❤️
Simone says
Hi! I am making this beanie for charity and want to use Loops & Threads Kaleidoscope (Super Bulky 6), since I found it on sale and have so much. I made it and it is a bit big. If I go down in hook size to 6.00mm and do fewer rows do you think it will still work? Or do you have a different suggestion while still keeping with the number 6 yarn? I love the pattern and it works really quickly. I’m a fairly novice crocheter and would love your help troubleshooting. Thanks!
Jess @ Make and Do Crew says
Yup, I think your solutions are spot on. You may want to make a slightly fewer stitches if you don’t want a super slouchy hat.
The other thing is that you don’t necessarily have to go down a hook size because that might make your fabric kind of stiff. I’d use the recommended hook size on the yarn and then just chain fewer stitches / work fewer rows to make the same size rectangle. 🙂
Happy crocheting!
Jess